Commit a7f22bed authored by Antti Puisto's avatar Antti Puisto

Added input files to cubble_coarsening_static and cubble_coarsening_flow

parent 633b02b1
Pipeline #5220 passed with stages
in 1 minute and 40 seconds
{
"phiTargetExpl": "The target volume fraction.",
"phiTarget": 0.9,
"kappaExpl": "Relative strength of liquid-intermediated diffusion versus diffusion through thin films.",
"kappa": 0.1,
"numBubblesInExpl": "Total number of bubbles to simulate.",
"numBubblesIn": 3e5,
"minNumBubblesExpl": "The simulation runs as long as there are at least this many bubbles.",
"minNumBubbles": 3000,
"kParameterExpl": "A bundle of constants related to gas exchange. Should be small relative to AvgRad.",
"kParameter": 0.001,
"wallDragStrengthExpl" : "How strong the drag from the wall is. Should be between 0.0 and 1.0",
"wallDragStrength" : 0.1,
"boxRelDimExpl": "The relative dimension of the box.",
"boxRelDim": {
"x": 1.0,
"y": 1.0,
"z": 1.0
},
"flowLbbExpl": "(Relative) Lower-back-bottom of flow area.",
"flowLbb": {
"x": 0.0,
"y": 0.475,
"z": 0.0
},
"flowTfrExpl": "(Relative) Top-front-right of flow area.",
"flowTfr": {
"x": 1.0,
"y": 0.525,
"z": 0.0
},
"flowVelExpl": "Flow velocity inside flow area.",
"flowVel": {
"x": 0.01,
"y": 0.0,
"z": 0.0
},
"muZeroExpl": "The viscosity of the fluid",
"muZero": 1.0,
"sigmaZeroExpl": "The surface tension (spring constant) of the fluid.",
"sigmaZero": 1.0,
"avgRadExpl": "The average radius of the bubbles.",
"avgRad": 1.0,
"stdDevRadExpl": "The standard deviation of the bubble radii.",
"stdDevRad": 0.21,
"errorToleranceExpl": "The error tolerance level for the integration.",
"errorTolerance": 1e-5,
"timeStepInExpl": "The initial time step with which to increment the simulation time.",
"timeStepIn": 1e-3,
"rngSeedExpl": "The seed for the RNG.",
"rngSeed": 4,
"numBubblesPerCellExpl": "How many bubbles per cell.",
"numBubblesPerCell": 32,
"numStepsToRelaxExpl": "How many steps to take per 'relaxation round' when equilibrating the bubble bath.",
"numStepsToRelax": 1e4,
"maxDeltaEnergyExpl": "Maximum allowed energy change when relaxing the bubble bath.",
"maxDeltaEnergy": 1e-5,
"snapshotFrequencyExpl" : "How often are snapshots saved. Bigger number can be used to get smoother animations, 0.0 means no snapshots.",
"snapshotFrequency" : 1.0
}
{
"phiTargetExpl": "The target volume fraction.",
"phiTarget": 0.9,
"kappaExpl": "Relative strength of liquid-intermediated diffusion versus diffusion through thin films.",
"kappa": 0.1,
"numBubblesInExpl": "Total number of bubbles to simulate.",
"numBubblesIn": 3e5,
"minNumBubblesExpl": "The simulation runs as long as there are at least this many bubbles.",
"minNumBubbles": 3000,
"kParameterExpl": "A bundle of constants related to gas exchange. Should be small relative to AvgRad.",
"kParameter": 0.001,
"wallDragStrengthExpl" : "How strong the drag from the wall is. Should be between 0.0 and 1.0",
"wallDragStrength" : 0.1,
"boxRelDimExpl": "The relative dimension of the box.",
"boxRelDim": {
"x": 1.0,
"y": 1.0,
"z": 1.0
},
"muZeroExpl": "The viscosity of the fluid",
"muZero": 1.0,
"sigmaZeroExpl": "The surface tension (spring constant) of the fluid.",
"sigmaZero": 1.0,
"avgRadExpl": "The average radius of the bubbles.",
"avgRad": 1.0,
"stdDevRadExpl": "The standard deviation of the bubble radii.",
"stdDevRad": 0.21,
"errorToleranceExpl": "The error tolerance level for the integration.",
"errorTolerance": 1e-5,
"timeStepInExpl": "The initial time step with which to increment the simulation time.",
"timeStepIn": 1e-3,
"rngSeedExpl": "The seed for the RNG.",
"rngSeed": 4,
"numBubblesPerCellExpl": "How many bubbles per cell.",
"numBubblesPerCell": 32,
"numStepsToRelaxExpl": "How many steps to take per 'relaxation round' when equilibrating the bubble bath.",
"numStepsToRelax": 1e4,
"maxDeltaEnergyExpl": "Maximum allowed energy change when relaxing the bubble bath.",
"maxDeltaEnergy": 1e-5,
"snapshotFrequencyExpl" : "How often are snapshots saved. Bigger number can be used to get smoother animations, 0.0 means no snapshots.",
"snapshotFrequency" : 1.0
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment